Mechanical Draft Cooling Tower

Mechanical Draft Cooling Tower

 

Mechanical Draft Cooling Towers

Mechanical Draft Cooling Tower are the most widely used in buildings and rely on power-driven fans to draw or force the air through the tower. They are normally located outside the building. The two most common types of mechanical draft towers to the HVAC industry are induced draft and forced draft.

Cooling Tower also known as a cooling tower ventilated by wind, which is the main equipment of circulating water evaporative cooling. is widely used in petroleum, chemical, metallurgical and other industries.

The cooling tower includes a Bottle type cooling Tower, square counter flow cooling tower, square cross flow cooling tower and closed circuit cooling tower.

Mechanical Draft Cooling Towers

There are the most widely used in buildings and rely on power-driven fans to draw or force the air through the tower. They are normally located outside the building. They are normally located outside the building ,A mechanical draft cooling tower, also known as is a cooling tower ventilated by wind, which is the main equipment of circulating water evaporative cooling. Widely used in petroleum, chemical, metallurgical and other industries.

The cooling tower makes use of the chimney operation of the cooling tower. The air flow is caused by the temperature difference between the air inside and outside the cooling tower. While mechanical draft cooling towers use fans to make air flow.

The advantages of mechanical draft cooling tower are compact structure, small volume, light weight, convenient installation, not affected by external wind, reliable cooling effect; less loss of cooling water blowing, higher cooling efficiency, high water spraying density, less one-time investment. uses power-driven fan motors to force or draw air through the tower. Induced draft, a mechanical draft tower with a fan at the discharge at the top, can pull air up through the tower. The fan enables to induce hot moist air out the discharge.