Manufacturer Fanless Cooling Tower India

Manufacturer Fanless Cooling Tower India

• Manufacturer Fanless Cooling Tower India The main function of the offered dry cooling tower is to cool and maintain the temperature of process hot water at a particular level.
•  

It is based on the principal of transfer of heat from hot water to atmospheric air by arranging the both air & water to come in contact with each other in such a fashion that heat transfer is maximum.

The axial flow fans are noise-free. The low speed of the motor minimises noise and increases efficiency.

Motors are specially designed to withstand moisture, rain and dust.

This assures better contact of air and water and the high cooling efficiency.

Fanless Cooling Towers is a design in which the flow is directed perpendicular to the water. The air continues through the fill and thus past the water flow into an open plenum volume. A fan forces the air out into the atmosphere. Air flow enters one or more vertical faces of the cooling tower. Water flows through the fill by gravity. A cooling tower is a device that rejects waste heat to the atmosphere through the cooling of a coolant stream, usually a water stream to a lower temperature. Cooling towers may either use the evaporation of water to remove process heat and cool the working fluid to near the wet-bulb air temperature or, in the case of dry cooling towers, rely solely on air to cool the working fluid to near the dry-bulb air temperature using radiators.

Manufacturer Fanless Cooling Tower India

Cooling exhausted with the help of induced or forced draft fan motor and gear reducers. Drift loss and dust control. It keeps the drift loss between 0.001% and 0.009% depends on ejection pressure, water loss is 95% less than of traditional tower. More dust possibilities and more drift losses than Fanless towers because Fan motor force is there.