Fanless Cooling Tower

This tower does not contain any fan or fill used to cool the water and so it is called fan less and fill less cooling tower. The wooden louvers are used as the side wall of the cooling tower to restrict the water spillage.

Bottle Shape Cooling Tower

This counter flow induced draft cooling tower is designed with bottle type structure, So that the volume of prevailing air is minimized. Every part of the cooling tower is designed and made precisely

Square Shape Cooling Tower

The induced draft Square Shape cooling tower generally offers the most effective and economical solution to most of cooling needs. TIPO has supplied numerous IDCT worldwide for all power and industry applications and all environmental conditions.

Pultruded FRP Cooling Tower

Pultruded FRP based cooling towers have structures having proven Braced Frame Design. These structures are connected to the ground with steel angles and base plates anchored and grouted to the basin. Hardware used at all the places are stainless steel.

Single Crossflow Cooling Tower

Single cross flow cooling tower remains a good fit to the industrial applications. In the cross flow cooling water, the air flows via the fills in a horizontal fashion and water falls down in a vertical fashion. This cooling tower remains filled with splash type fillings.

Double Crossflow Cooling Tower

The tower design incorporates a FRP distribution basin with number of flower type target nozzles in it and is located at the tower top. The water, by gravity, is dispersed over the fill media uniformly and water is allowed to pass vertically down.

Dry Cooling Tower

Dry Cooling Towers is also known to be indirect closed loop cooling tower. Dry Cooling Towers has been structured in an way that water is cooled by the circulation through the finned tubes, which results in heat transfer.

Wooden Cooling Tower

The tower design incorporates a RCC basin with number of flower type target nozzles in it and is located at the tower top. The water, by gravity, is dispersed over the fill/splash media uniformly and water is allowed to pass vertically down.

Closed Circuit Cooling Tower

Closed circuit cooling towers operate similarly to open towers except there is a heat exchanger coil within the tower that separates the cooling tower water from the building cooling water.

Turbine Cooling Tower

Turbine Cooling Tower was created for industrial plants to improve efficiency, and on a larger scale, to help reduce the world’s energy consumption by targeting the plants that consume the most energy.

Forced Draft Cooling Tower

Forced draught fan handles cold and dry air with much less specific volume and hence air flow quantity is lesser, for a given duty, than Induced Draught. The velocity pressure which gets wasted into the atmosphere in Induced Draught

FRP Multi Cell Cooling Tower

FRP Multi Cell Cooling Towers. belongs to the series of Counter-Flow Rectangular Shaped Cooling towers. The FRP Multi Cell Cooling Towers is made by the combination of FRP Multi Cell Cooling Towers and facilitates

Closed Circuit Hybrid Cooling Tower

Closed Circuit Hybrid Cooling Towers deliver fully rated thermal performance over a wide range of flow and temperature requirements. Distinct advantages of the Hybrid include plume abatement